This is kitchen tips Saturday where you learn tricks you didn't know exist!.
The important things to know in the kitchen is always the least things we remember, Did you know your pan or pot can be neater than the way it is now ?? I bet not! You can now stop worrying about how your kitchen pots looks Because luckily I'm here to help.
Things you need:
Table Salt
Water
Burnt Pan
Iron sponge
Procedures:
Step 1: after the pan has cooled off from the heat of the fire, fill it with warm water after that add the salt 2-3 spoons into the water making sure it gets to all the areas in the pan.Leave it to soakStep 2: After two minutes transfer the pan to the gas cooker or stove and allow the water boil for 15 minutes. Make sure to wipe the bottom of the pan incase extra water has gotten to the bottom of the pan. Then wait and let the pan bubble without any trouble.
Step 3: Boiling should have gotten most of the burns off but if it didn't the next step is a salt scrub. Pour out most of the salt water (from boiling) leaving very little inside the pan, pour in more salt (1-2 table spoons) using a scrub or iron sponge to scrub off the remaining burnt.
Till next time, stay glued for another section of KTS.
Nice 👍
ReplyDeleteThanks b
ReplyDelete